The TC Series is the most compact Torqmotor™ for lighter duty applications. Sintered copper/steel bushings for side loads up to 790 lb. With intermittent pressures to 1750 psi, torques up to 2700 lb-in can be obtained. Shaft size 1 inch nominal.
Light duty torque motor – The only motor in its class with roller bearings, the TE Series can handle side loads of 1500 lb and withstand the pounding delivered by chain and sprocket couplings.
The Torqmotor™ TF Clutch Series low speed, high torque motor is ideal for applications where a freewheeling output shaft is required for some part of the duty cycle. Intermittent pressures to 4000 psi, torques to 7000 lb-in. Shaft size 1.25 inch.
Available in flange or wheel mounts, the TF Series motor has intermittent pressure ratings to 4,000 psi, torques to 8,100 lb-in. Side load capability is 4,000 lb. on flange mounts, 6,000 lb. on wheel mounts. Shaft size 1.25 inch nominal.
With increased power and durability, the Parker Torqmotor™ TG Series low speed high torque (LSHT) hydraulic motor is available in flange or wheel mounts. Torques to 12,600 lb-in and displacements to 58.5 cu in. Shaft sizes to 1.375-inch nominal.
The rugged TGK Series heavy duty hydraulic motor uses an extra heavy drive train in a standard size motor to deliver up to 19,000 lb-in torque, with intermittent pressure ratings to 4000 psi. Max dynamic side load capability is 3600 lb. at the key.
Get higher side-load capability up to 6000 lb. on flange mounts and 5200 lb. on wheel mounts. The TH Series motor has a 1.5 inch nominal shaft size. Torques to 13,100 lb-in and intermittent pressure up to 4000 psi.
The TJ Series marries the TE Series drive train with a larger, heavier duty roller bearing and shaft. This compact, economical wheel motor has intermittent pressures to 2750 psi and torques to 5700 lb-in. The shaft is 1.25 inch nominal.
The largest Torqmotor, the TK Series is available in flange and wheel mounts. Torques to 23,500 lb-in, intermittent pressures to 4500 psi. Side loads to 7500 lb. on flange mounts, 9,400 lb. on wheel mounts. Shaft size 1.5-inch nominal.